Selectra ProS Chemistry System

  • Sharebar
Selectra ProS Chemistry System
Selectra ProS Chemistry SystemSelectra ProS Chemistry SystemSelectra ProS Chemistry System
SKU: 6003-500

Fully-featured, compact system with enhanced performance. Typical throughput is 140 tests per hour and up to 266 test per hour including ISE.

The latest in the Selectra Pro series, the Selectra ProS is our most compact, fully featured system with enhanced performance and best-in-class operator interface. New system features enable significant enhancements, not typically found in BenchTop chemistry analyzers.

Together with a superior menu of ready-to-use, liquid-stable reagents, the Selectra ProS provides a fully integrated chemistry solution for smaller or satellite laboratory locations. With random access and typical throughput up to 140 tests per hour, the Selectra ProS system is the ideal BenchTop workhorse for primary, STAT or back-up testing needs.

This new system offers minimal maintenance and effective use of consumables to truly reduce operational cost.

  • Fully-automated clinical chemistry analyzer
  • Typically 140 photometric and electrolyte tests / hour
  • Broad test menu
  • Best-in-class operator interface
  • Productivity and error reducing capabilities
  • Automated reagent management
  • Annual ProActive Maintenance Kit
Typically 140 photometric and electrolyte tests / hour
Light source: 
Quartz-iodine lamp 12V-20W
Standard wavelengths: 
340, 405, 505, 546, 578, 620, 660, 700 nm
Operating Modes: 
  • Kinetic measurement with linearity check
  • Mono- and bichromatic end point measurement with or without bichromatic reagent blank and/or sample blank correction
  • Two point measurement; with or without slope blank
  • Graphic plot of all measuring points
  • Predilution and automatic reflex dilution as needed
  • Non-linear calibration curves
  • Prozone check for immunology tests
  • Cut-off declaration
  • Calculated tests.
Operating Temperature Range: 
15 – 32 °C (59 – 90 °F)
Operating humidity: 
15 – 85% RH
Touch screen navigation
  • State of the art Host-Query interface available;
  • Host: RS 232 or Ethernet (TCP/IP)* through LIS-2A protocol. *Under development
Special Features: 
  • One rotor combining sample and reagent positions
  • Inner rotor ring:
    • 30 refrigerated reagent positions for 10 mL, 25 mL and 50 mL reagent bottles
    • Cooled to 10°C +/- 4°C at normal laboratory conditions
    • All reagent positions can be assigned as R1, R2 and R3.
  • Outer rotor ring:
    • 25 barcode readable positions
    • All positions fit 13x75 mm primary and secondary tubes and pediatric cups
  • All positions can be used for calibrators, controls, normal, pediatric and STAT samples.
Dimension (W×H×D): 
90 x 75 x 60 cm (W x H x D)
75 kg (165 lbs)
100 – 240 V, 50 – 60 Hz, max. 350 VA